All original and all working, 24 volt trolling motor, Depth finder, live wells, bilge pump,lights,speedo, tach. And did'nt run out bad........34 mph, not fast, but not bad for a heavy, 32 year old boat.
Author: hardtimesx2; Tags: Old bass boats Antique Ranger Boats Antique outboard motors
the gauge is the thickness of drive link where it fits into the guide bar (eg, 0.05 inch). Conventional "full complement" chain has one tooth per drive link. Built into each tooth is a depth gauge or "raker" which rides ahead of the tooth and limits the depth of cut, typically to around 0.025". Depth gauges are critical to safe chain operation. If left too high they will cause very slow cutting, if filed too low they will make the saw dangerous and hard to control. The underside of each ...
Author: 2008FORDF450V8; Tags: chaninsaw brick STIHL ECHO HOMELITE
line with the featured forward bow locker fuel tank and under deck fuel line creates additional weight savings The console can also be built to accept an array of electronics with 3 external 12 volt sockets for GPS Ipod Cellular Phone and Depth Finder. The 2010 NANO line is presently available in 10 (3.10m) - 12 (3.56m) - 13 ((3.99m) -14 (4.29m) - 15 (4.60m) models and are available with a variety of different color options. For further information regarding the Nautica NANO line contact ...
Author: mickeyk600; Tags: Zodiac Avon Nautica Novurania AB Caribe Apex Yamaha Honda outboard Jet I/O Suzuki center console Yanmar volvo DL EQ RIB inflatable rigid Hypalon Hamylton Hamilton
Found this for sale local,1 owner, very few hours, all original. Every thing works,live wells, bilge pumps, lights, depth finder(the original, from '78). Needs cleaned up and polished.
Author: hardtimesx2; Tags: Bass boat Old Ranger
the technical characteristics. BUT NOT FORBIDDEN: Quasar is designed to satisfy the demand of who is looking for the best performances at the best price. It communicate with all the types of equipment connected to the machine: Sheet Followers, Gauges, Robots and remote Input/Output systems. GENERAL FEATURES: Axes Number: 12 Max. Hydraulic axes: -Managed through PLC CRC2* Task84 system, connected with CanBus interface. Backgauges: -Managed through EMBLAX or MICROAX Task84 drivers, connected ...
Author: sheetmetallman; Tags: Abkantpressenservice Tafelscherenservice Schwenkbiegemaschinenservice Abkantwerkzeuge Abkantwerkzeug Schermesser Schwenkbiegewerkzeuge Gesenkbiegewerkzeuge Biegewerkzeuge Werkzeuge für Abkantpressen Tafelscheren und Schwenkbiegemaschinen Gesenkbiegepresse
intercom system allow the personnel on board the bucket to speak with personnel on the ground. The bucket can be used for the inspection of the bridges and viaducts piers, as well as of the slopes on the roads sides, thanks to the wide working depth underbridge which can vary from 10 and 25,5 m., depending on the model. AB line rail/road version The AB LINE production range is completed by COMBI models, rail/road version, which can be used for the inspection and maintenance of either road ...
Author: barinsrl; Tags: barin aerial under bridge platform constructor railway railroad access inspection
Hannifin C-Frame Hydraulic Straightening Press Ref.#88-199 Model No. 75-Ton Serial No. A-55718 Capacity:75-Tons Stroke:11-1/2" Maximum Daylight Opening:18" Throat Depth:10-3/4" Bed Size:12-1/4" x 104" Overall Dimensions:56" x 104" x 103" High Machine Weight, Approx.:12500 Lbs. Equipped With: Pressure Gauge Pressure Control 10 HP Hydraulic Motor 220/440/3/60
Author: IndustrialSurplus; Tags: Hannifin Hydraulic press C-Frame Straightening hyd 75-ton 75 ton
the technical characteristics. BUT NOT FORBIDDEN: Quasar is designed to satisfy the demand of who is looking for the best performances at the best price. It communicate with all the types of equipment connected to the machine: Sheet Followers, Gauges, Robots and remote Input/Output systems. GENERAL FEATURES: Axes Number: 12 Max. Hydraulic axes: -Managed through PLC CRC2* Task84 system, connected with CanBus interface. Backgauges: -Managed through EMBLAX or MICROAX Task84 drivers, connected ...
Author: sheetmetallman; Tags: Abkantpressenservice Tafelscherenservice Schwenkbiegemaschinenservice Abkantwerkzeuge Abkantwerkzeug Schermesser Schwenkbiegewerkzeuge Gesenkbiegewerkzeuge Biegewerkzeuge Werkzeuge für Abkantpressen Tafelscheren und Schwenkbiegemaschinen Gesenkbiegepresse
Linkhart Fishing is launching their new Camera Bar an accessory that attaches to your onboard depth finder or GPS mount and allows you mount a camera on your boat safely and securely. Need a spot to set up your camera for self portraits or film yourself while fishing? than contact us at linkhartfishing.com
Author: LinkhartFishing; Tags: Bass Trout Fishing Boating camera bar
