morgan7557 Videos

Switched from the bigger carbide paint scraper back to the machinist's scraper. Spotting is looking good again and the coverage is starting to expand a bit.

Tags: bed scraping 11 04 09

pouring the 3", 2" and 1" ball cranks for the gingery lathe I'm building. Includes the mold, pour, end results and finished cranks.

Tags: ball cranks pour shakeout

Video of me pouring the tailstock end bed footing for my gingery lathe. Includes mold cavity shots, the pour and the results.

Tags: tailstock pour shakeout wmv

goes over my two attempts at casting an upscaled version of the gingery lathe bed, and also the results of casting an upscaled version of the headstock end bed footing.

Tags: lathe bed head foot results wmv

Going over what I'm doing with regard to my first attempt at scraping the bed for the Gingery Lathe I'm building. Might have some useful recommendations for other beginners who have no prior experience with scraping...

Tags: scraping lathe bed wmv

A video demoing my new lift and pour system - based on tiwonk's design at the gingery machines yahoo group with slight modifications. I definitely feel a lot better pouring with this setup and think it will be a lot safer as well.

Tags: foundry tools