Electro-hydraulic cutter Videos

The Krenn KTC26 Chain and Hard Material Cutter is featured here cutting grade 70 chain. This Powerful cutter generates 31 metric tons of cutting force and can cut material up to 26mm (1.024"). The wedge type blades are great for cutting chain, spring material and hard wire, rod and bar. The depth and angle of blades allow both side of chain link to be cut at one time. For more information on the cutter contact Die Quip at diequip@diequip.com.

Author: tmaxwelljr; Tags: Krenn KTC26 Electro-hydraulic cutter Electro Hydraulic Wire Cutter Steel Cutter Wire Cutter Chrome Silicon Die Quip

The Krenn OS-13AC Battery-Powered Electro-Hydraulic Cutter is featured here cutting .500 1010 steel wire rod . Take the power off hydraulics anywhere in the plant or wire yard! This portable and compact cutter can easily cut material up to 13mm (.500"). It is ideal for cutting wire, rod, bar, rebar, fasteners and non-ferrous material. Eliminate dangerous chop saws, torches and manual bolt cutters! For more information on this cutter contact Die Quip at diequip@diequip.com....

Author: tmaxwelljr; Tags: Krenn OS13 Battery Powered Cutter Bolt Cutter Wire Cutter Steel Cutter Electro-Hydraulic Cutters Hydraulic Cutters Powered Cutters Die Quip

The Krenn DC-16W Electro-Hydraulic Cutter is featured here cutting .515 and .625 1010 steel wire rod . This compact cutter can quickly and easily cut material up to 16mm (.625"). It is ideal for cutting wire, rod, bar, rebar, fasteners and non-ferrous material. Eliminate dangerous chop saws, torches and manual bolt cutters! For more information on this cutter contact Die Quip at diequip@diequip.com.

Author: tmaxwelljr; Tags: Electro-hydraulic cutter bolt cutter wire cutter steel cutter powered cutter hydraulic cutters Die Quip

, the BC-250 is very friendly to the user. With excellent balance and a very narrow profile, cutting close to the object is easy. The trigger grip handle offers further flexibility by rotating through 360° thereby ensuring that whatever the angle of cutter, the user is never in danger of being trapped between the tool and the cutting target. ... "rescue tools" "bar cutters" "technical rescue" extrication USAR "fire brigade" "protestor release" "police forced entry" firefighting spreaders ...

Author: VimpexRescue; Tags: rescue tools bar cutters technical rescue extrication USAR fire brigade protestor release police forced entry firefighting spreaders cutters RTA

Glassblowing Skeels Glass 1992-1994 Rondel Project. Electro-hydraulic rolling yoke supports a 2" shaft x 4" head blowpipe. Articulates up/down, in/out, angle-up/angle-down, clockwise/counter-clockwise rotation and rotation speed control. Glass rondel was blown backwards on the pipe; Glass is pierced with a 1/2 inch metal rod from the far end to an appropriate depth (about 12 inches in this piece) then inflated using a compressed air steam stick. Total working time was 3 hours per rondel ...

Author: keithorr; Tags: glassblowing glass blowing rondel roundel skeels keith orr blowpipe blowpipes hydraulic

Glassblowing Skeels Glass 1992-1994 Rondel Project. Electro-hydraulic rolling yoke supports a 2" shaft x 4" head blowpipe. Articulates up/down, in/out, angle-up/angle-down, clockwise/counter-clockwise rotation and rotation speed control. Glass rondel was blown backwards on the pipe; Glass is pierced with a 1/2 inch metal rod from the far end to an appropriate depth (about 12 inches in this piece) then inflated using a compressed air steam stick. Total working time was 3 hours per rondel ...

Author: keithorr; Tags: glassblowing glass blowing rondel roundel skeels keith orr blowpipes

RC-25 Rebar Cutting Tool Table top, portaqble hand held cutter Capacity: #8 -- 1" -- 25 mm round Self contained electro-hydraulic cutter Single phase, 115 volts w/protection cover over cutting head, steel carry box, etc. ... TYC-HD25B Single Phase Rebar Cutting Tool Hand Held Electro-Hydraulic

Author: genscoequip; Tags: TYC-HD25B Single Phase Rebar Cutting Tool Hand Held Electro-Hydraulic

RC-19 Rebar Cutting Tool Table top, portaqble hand held cutter Capacity: #6 -- 3/4" -- 20 mm round Self contained electro-hydraulic cutter Single phase, 115 volts w/protection cover over cutting head, steel carry box, etc. ... Rebar Cutter Single Phase Hand Electric TYC-HD19A Electro Hydraulic

Author: genscoequip; Tags: Rebar Cutter Single Phase Hand Electric TYC-HD19A Electro Hydraulic

The Krenn TR19 PC Strand and Hard Material Cutter is featured here cutting .600 1080 steel rod, .375 and .500 PC strand. This Powerful cutter generates 30 metric tons of cutting force and can cut material up to 19mm (.750"). The radiused stationary blade is ideal for cutting PC strand and spring grade wire because it spreads out cutting stress and helps holds strand together. This compact design makes this unit easy to use throughout workplace and eliminates cumbersome hydraulic pumps and ...

Author: tmaxwelljr; Tags: Krenn TR19 Electro-hydraulic cutter Steel Wire Cutters Powered Cutters Hydraulic Cutters PC Strand Die Quip

The Krenn KTC26 Chain and Hard Material Cutter is featured here cutting grade 70 chain. This Powerful cutter generates 31 metric tons of cutting force and can cut material up to 26mm (1.024"). The wedge type blades are great for cutting chain, spring material and hard wire, rod and bar. The depth and angle of blades allow both side of chain link to be cut at one time. For more information on the cutter contact Die Quip at diequip@diequip.com.

Author: tmaxwelljr; Tags: Krenn KTC26 Electro-hydraulic wire cutter electro hydraulic cutter steel cutter wire cutter die quip